[Full kit]Joyetech Elitar Pipe ราคา 1290 บาท มีสีดำ
Joyetech Elitar Pipe TC Starter Kit W/O Battery
Joyetech Elitar Pipe is cool, sophisticated and elegant in appearance. It brings you back to the old days with its timeless classic design and premium finish. Powered by single 18650 battery with 75W maximum output, Elitar presents a 0.66-inch OLED screen, having TC/Power/BYPASS/TCR modes available. E-liquid filling can be easily achieved by simply removing the top cap and injecting into the side holes. Featuring an upgradeable firmware, the Elitar Pipe can perfectly satisfy you on a daily basis. The innovative leak resistant cup design atomizer allows to enjoy the best vaping experience ever.
Size: 38.00mm (W) x 147.50mm (L) x 36.50mm (H)
Diameter for the atomizer: 22.00mm
Output mode: VW/TC(Ti, Ni, SS316)/Bypass/TCR(M1, M2, M3)
Output Wattage: 1-75W
E-liquid Capacity: 2.0ml
Resistance Range: 0.05-1.5ohm for TC/TCR mode; 0.1-3.5ohm for VW/Bypass mode
Temperature Range: 100-315°C/ 200-600°F
Colors: Gold, Grey, Black, White, Wood
It comes with
- 1 x Elitar Battery (without cell)
- 1 x Elitar Atomizer
- 1 x BF SS316-0.5ohm DL.
- 1 x LVC Clapton-1.5ohm MTL.
- 1 x USB Cable
- 1 x User Manual
- 1 x Warranty Card
- 1 x Warning Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
- It doesn't come with liquids or 18650 battery, you shall buy it separately.
- Compatible with BF Replacement Coil and LVC Clapton MTL Head.
Classic combines with technology
Simple and clear
Integrated design with premium finish
Top filling and top airflow control
Replaceable battery and magnetic cover
Innovative leak resistant cup design
Detachable and washable structure
Intelligent temperature control system with multiple modes
Multiple Atomizer Heads Can Be Applied
Exquisite spring loaded 510 thread
How to assemble
1. Screw the top cap onto the airflow ring and put the mouthpiece onto the top.
2. Drip a few drops into the atomizer head and install it onto the vent pipe.
3. Install the above part with the atomizer tube then the whole Elitear atomizer tube is assembled.
Replace Atomizer Head
Unscrew the atomizer cap, the atomizer head (with natural cotton)is located on the cap, just unscrew it and replace and clean.
1. Please don't wash the head with watter. Simply scrub it with cotton or clean dry cloth.
2. Please drip at least 5 drops of e-juice to the atomizer head and vape for a few times in power-off condition before its first use to avoid dry burn.
Separate the atomizer from the battery, and unscrew the mouthpiece base from the atomizer cap. Inject the liquid into e-juice hole at the both sides.
Our images are copyrighted. It is forbidden to reprint without our permission.